Oġġetti | Kapaċità tal-produzzjoni tal-massa | Kapaċità ta' prototipi |
| Saffi | 1-20 | 1-28 |
| Materjali bażi | FR-4, Frekwenza għolja |
| Daqs massimu | 500mm × 600mm | 580mm × 800mm |
| Preċiżjoni tad-dimensjoni | ± 0.13mm | ± 0.1mm |
| Firxa tal-ħxuna | 0.20-4.00mm | 0.20-6.00mm |
| Tolleranza tal-ħxuna (THK≥0.8mm) | ±8% | ±8% |
| Tolleranza tal-ħxuna (THK <0.8mm) | ±10% | ±10% |
| Ħxuna dielettrika | 0.07-3.20mm | 0.07-5.00mm |
| Wisa' minimu tal-linja | 0.1mm | 0.075mm |
| Spazju minimu | 0.1mm | 0.075mm |
| Ħxuna tar-ram ta 'barra | 37-175um | 35-280um |
| Ħxuna ta 'ġewwa tar-ram | 17-175um | 17-280um |
| Ħaffra toqba (Mekkanika) | 0.15-6.35mm | 0.15-6.35mm |
| Toqba lesta (Mekkanika) | 0.10-6.30mm | 0.10-6.30mm |
| Tolleranza tad-dijametru (Mekkanika) | ± 0.075mm | ± 0.075mm |
| Tolleranza tal-pożizzjoni tat-toqba (Mekkanika) | ± 0.05mm | ± 0.05mm |
| Proporzjon tal-aspett | 10:01 | 13:01 |
| Tip ta 'maskra tal-istann | LPI | LPI |
| Wisa' minimu tal-pont tal-maskra tal-istann | 0.1mm | 0.08mm |
| Distanza minima tal-maskra tal-istann | 0.075mm | 0.05mm |
| Ipplaggja dijametru tat-toqba | 0.25-0.50mm | 0.25-0.60mm |
| Tolleranza tal-kontroll tal-impedenza | ±10% | ±10% |
| Finitura tal-wiċċ | HASL, LF-HASL, ENIG, Imm Tin, Imm Ag, OSP, Gold Finger |
